Synthetic Turf Explained: Fibres, Infill and Lines

Narayanpur Mini Stadium

What is artificial grass made of, why does it need infill, and how do lines get on it? A plain guide to what you are actually buying.
Focus keyword: synthetic turf
Meta description: A simple guide to synthetic turf: fibres, backing, infill, seams and line marking, and what to ask a supplier. From our Narayanpur project in Assam.
Image alt: Close up of synthetic turf fibres and infill on a mini stadium pitch

Synthetic turf looks simple. Green fibres, white lines, done. But once you start comparing quotes, you meet words like pile height, denier, backing and infill. Here is what they mean, based on what we handle when we build grounds like the Narayanpur Mini Stadium in Assam.

The fibres

The grass blades are made of polyethylene or polypropylene yarn. Different yarn shapes behave differently. Some are straight and flat, some curled to look more natural. The key points are how soft they feel, how well they spring back after being trodden on, and whether they resist sunlight. Cheap yarn fades and goes brittle in strong sun.

Pile height

Pile height is the length of the fibres above the backing. For football, it usually runs around 40 to 60 mm. Taller pile cushions more and holds more infill. Shorter pile is firmer and suits some other sports. Choose the height to suit the game, not the brochure.

The backing

The fibres are stitched, or tufted, into a backing fabric. A coating, often latex or polyurethane, locks them in. The quality of this coating is one of the biggest factors in life span. A weak coating lets fibres pull out, leaving bald patches.

Infill

Infill is the material spread between the fibres. It does several jobs:

  • Holds the fibres upright
  • Adds weight so the carpet stays flat
  • Cushions the surface
  • Protects the backing from sun

Silica sand is common. Some surfaces add rubber granules on top. Over time infill gets displaced, especially around goals and the centre circle, so it needs topping up now and then.

Shock pad and base

Under the carpet is the prepared base. A shock pad can go between them for extra cushioning. The turf can only be as flat as the base beneath it. A bump in the base becomes a bump in the pitch.

Seams and joins

Turf comes in rolls about four to five metres wide. Rolls are joined with seaming tape and adhesive. A good seam is nearly invisible and holds for years. A bad seam lifts, trips players and lets water in. Joining is skilled work, and it is worth watching.

Line marking

Lines can be tufted in during manufacture or cut in and glued on site. Cut-in lines are used when one pitch serves several sports. Each sport has its own colour, so a football pitch and a hockey pitch can share a surface without confusion. [ADD: what lines were marked at Narayanpur.]

What to ask a supplier

  • What is the yarn material and the pile height?
  • What is the backing coating?
  • How much infill per square metre?
  • What is the warranty and what does it cover?
  • Can I see a sample that has been used in the field?

Common mistakes

Buying on price alone, skipping the base preparation, and ignoring the infill specification. Each one shortens the life of the pitch.

We advise clients on all of this before they commit. You can see our range on the About page and on Zajra Green.

Planning a ground, court or stadium?

Our team can visit your site and give you a clear plan and budget.

Visit Zajra Green

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top